Apple

Apple iPhone 6

Temporary archive edition · Legacy entry updated 2020-02-21

About this device

Apple Iphone 6 was presented in the fall of 2014. Has the Apple A8 processor, with two cores on 1.4 GHz. This processor has a 64-bit architecture ARMv8-A.
Installed 1GB RAM, support microSD memory card is missing. The IPS display diagonal of 4.7" and a resolution of 1334×750. Main camera 8 MP with aperture of ƒ/2.2 and a front 1.2 MP. There is support for Wi-Fi 802.11 b/g/n/AC (2.4 and 5 GHz). 3.5 mm Jack for headphones and microphone and Lightning connector.
A lithium-polymer battery 1810 mAh.
Dimensions 138,1×67×6.9 mm
Weight 129 g

Reset instructions

Simple reboot (Soft reset) ↓Sign in recovery mode ↓

Temporary archive edition

Simple reboot (Soft reset)

A reset may erase data and settings. Back up important data and check the manufacturer’s requirements first.

This text was machine translated on the old site.

If Apple iPhone 6 is frozen and will not respond to any manipulation, or for no reason stopped and enabled to respond to the charger, you can try to reload it by doing the soft reset. Soft reset is a normal reset of the device. As if you pulled the battery and put it back in, it will not delete any data. All information in the phone will remain.

To execute a simple reset, press and hold the "Home" button and "Power". After about 10 seconds the Iphone restarts and Apple logo appears. If the device has no software and hardware problems it should start in standard operating mode

The old database did not record a source. Check the manufacturer’s manual.

Temporary archive edition

Sign in recovery mode

A reset may erase data and settings. Back up important data and check the manufacturer’s requirements first.

This text was machine translated on the old site.

To enter Recovery Mode:

Press simultaneously buttons "Home" and "Power" button.
The device will display the slider off, then the screen goes blank. Do not release the buttons.
Wait until the device starts to boot and then release the "Power" button.
After 10-15 seconds, the screen displays an image of the cable and the iTunes icon.
Release the "Home" button

You entered the recovery mode. Connect your Iphone to ITunes and upgrade the firmware.

The old database did not record a source. Check the manufacturer’s manual.